Tag Archives: Nicole Browning

Just Peachey: Jeff’s Conservation Hand Tools Workshop

For one week in July, 2024, the Preservation Lab busted out belt sanders and opened the elbow grease to host a workshop taught by Jeff Peachey, learning all about making, modifying and maintaining our own hand tools. Jeff, a book conservator and master tool maker, brought all kinds of fun machinery and exciting tools for us to learn from and use. From hacksaws to pencil sharpeners, Jeff’s tool collection is inspiring, and we all left the week with some amazing new additions to our bench.

A set of raw materials each participant received at the beginning of the week to shape into their own personal new tool set! Credit: Jeff Peachey
Extra scraps of horse butt, cherry, pear and box wood, Delrin, and bamboo: materials we used and experimented with during our workshop. Credit: Jessica Ebert

Delrin

We started the week off working with Delrin. Delrin, an acetal homopolymer plastic that appears similar to Teflon, was easy to shape with saws, files, scrapers and silicon carbide sandpapers. We burnished with sanding pads and polishing paper.

We started off with Delrin rods that we shaped into delicate heras. Heras are thin tools with spatula-like ends that Jeff says are great for delicate prying, inserting small amounts of adhesive, and lifting tape to name a few of the uses for this handy little tool.

We made a rough cut of the shape we wanted with the bandsaw, then smoothed everything out by going through a sandpaper grit progression. Once we’d crafted these, many of us tried our hand at making versatile Delrin folders. With lots of filing and sanding, this malleable Delrin was easy to manipulate into a variety of tool shapes, and no two tools were exactly alike.

A Delrin hera created by Holly. Credit: Holly Prochaska
Ashleigh uses a saw to shape her Delrin. Credit: Ashleigh Ferguson Schieszer
Jeff demonstrates how to work with Delrin. Credit: Ashleigh Ferguson Schieszer

Knives

Our second and third days with Jeff were all about M2 steel knifes, both sharpening them and making them. We learned all about using Jeff’s sharpening system and honed down our own Peachey paring knife. We also made two lifting knives out of Starrett 32T hacksaw blades by grinding the blades down on a belt sander and then taking them through the sharpening system with microfinishing films to achieve a sharp edge.

A progression of 3M Microfinishing Films adhered to a glass plate for sharpening. Credit: Ashleigh Ferguson Schieszer
A Peachey knife next to a sharpening system on marble. Credit: Holly Prochaska

Sharpening knives turned out to be a complex process – a burr must be formed at each grit gradient before moving on to the finer grind, and if your hand position is off this could take some time. Furthermore, the wrong hand position could yield a bevel angle too big or too small on the plane of the knife. We aimed for an ideal bevel angle between 11 and 13 degrees.

Specular light shows a raw bevel angle during sharpening, before it has been ground smooth on the first grit progression. Credit: Ashleigh Ferguson Schieszer

Additional Knife Features

Some people chose to add grooves into the sides of their paring knives for a more comfortable grip; some of us chose to wrap our knife handles in leather and make horse butt sheaths for them. Matt was the bravest of all and mounted a custom carved wooden handle to his left-handed paring knife.

Catarina finishes a groove on the belt sander to make it more comfortable to hold. Credit: Ashleigh Ferguson Schieszer
Ashleigh begins her groove. Credit: Ashleigh Ferguson Schieszer
Matt’s paring knife is pictured with a wooden handle and leather sheath. Credit: Matt McCoy
Ashleigh’s German-style paring knife with a leather covered handle. Credit: Ashleigh Ferguson Schieszer
Kathy Lechuga’s completed hack saw lifting knife. Credit: Signature Conservation
Kathy Lechuga’s rounded French-style paring knife with a leather covered handle. Credit: Signature Conservation

Grained Book Cloth

We also went over creating 19th century grained book cloth on our third day. Through toning, glazing, then pressing with a die that has your desired pattern, it’s possible to create book cloth that mimics the textures of 19th century book cloth. After going through the time-consuming process, the idea of making up large batches at one time became appealing.

Jeff demos coating a cotton muslin with acrylics and paste, pressing the coated cloth with screens to add a grain, then finishing with an egg glare. Credit: Ashleigh Ferguson Schieszer
Jeff’s samples he made ahead of the workshop

Wood and Bamboo

On our fourth day we learned all about wood and bamboo carving. Using a chisel, wood plane or hatchet, we created the crude shape we wanted our wooden tools to take. Then we got to work sanding until the wood was smooth, and created a more precise shape. A final finish with nose grease or wax was optional.

Jeff’s workbench after his wood carving demo. Credit: Jessica Ebert

Bamboo is great for creating thin, flexible tools. With our pieces of wood most of us created folders, but a few decided to make wooden handles for their knives or straight edges. Personally, my favorite tool I created the whole week was my wooden folder I made, though it was probably the hardest to create. I had to shape it using a small hatchet, then sand it for quite some time before it took on the shape that I wanted.

Jeff demonstrating how to carve our piece of wood using his proprietary bench hook. Credit: Jessica Ebert
Holly chiseling a piece of bamboo using a generic bench hook. Credit: Jessica Ebert
My new wood folder. Credit: Nicole Browning

Stainless Steel

Our final day with Jeff was spent shaping stainless steel tools, which to me was the hardest material we worked with, as it took a lot of patience with the belt sander, and the metal was prone to heating up quickly and potentially burning our fingers. We created straight edges or 45 degree triangles, and even learned how to drill holes and attach small handles to these tools. We also had a thicker piece of stainless steel for creating a folder, which I found the most challenging of all. The stainless steel was harder to manipulate, understandably, and much less forgiving than the wood or Delrin.

Holly drilling holes in the stainless steel handle of her straight edge. Credit: Ashleigh Ferguson Schieszer
Two stainless steel folders made and engraved by Jessica. Credit: Jessica Ebert

We ended the week by testing the sharpness of our blades and doing a little show and tell of our favorite tools that we made. It was so amazing to see all the different tool shapes people were inspired to make based upon what they most used in their work.

My assortment of tools I made at the workshop. From left to right: bamboo lifters, two Delrin Heras, two lifting knifes, a Delrin folder, a paring knife and its sheath, and a wooden folder. Credit: Nicole Browning

Learning from Jeff was such an amazing opportunity, and it was so eye-opening and world-expanding to learn that so many of these tools we use every day can be created from our own hands.

Jeff did a fabulous job tailoring his tool-making workshop to the the availability of machinery and other logistics of our facility. As a result, the actual tools made in our version of this workshop vary from other workshops Jeff has taught, empowering us to keep making tools with our space in the future. If you ever have the chance to take this workshop, we highly recommend it!

Be sure to check out this Instagram post by Jeff featuring all of us showing off our favorite hand tools we created!

Nicole Browning [CHPL] – Conservation Assistant

Learning the Basics

Hi! I’m Nicole, and I’m the newest member of the Preservation Lab.

Portrait of Nicole Browning
Nicole Browning makes a corrugated clamshell enclosures

When I was interviewing for the position of Conservation Assistant, I did a deep dive into what preservation and conservation really mean. I read through blog posts and perused the Lab’s Instagram, trying to get a grasp on what exactly the lab did. Little did I know, these snapshots into lab life hardly even scratched the surface.

Materials and Tools

My first week as a Conservation Assistant was full of learning, from what types of boards and paper supplies are available, to how to create a pamphlet binder and sew music scores. I had no idea there were so many types of paper out there, and I was ignorant about how many tools there exist simply to cut these pieces of paper. My hand skills were immediately put to the test with learning the stitches used to attach pamphlets to protective premade binders, which create a hard cover for these otherwise soft materials. I was also instructed in which methods of cutting are best for which practices and types of paper, such as board shears for larger pieces of Bristol or corrugated board, scalpels and Olfas for small, precision cutting, and even a corner cutter to clean up the corners of your pamphlet binders!

A music score lays on a bench with a needle and thread used for conservation sewing.
Sewing parts of a music score with a needle and thread.

Enclosures

Over the next few weeks, I was thrust into a whole new world of enclosures after learning about pamphlet binders and music scores. Enclosures are typically boxes that are used to keep a book or object safe from light, dust, and other environmental factors that can harm the item over time.

Tuxedo boxes

Creating tuxedo boxes was an exciting and fun challenge, as getting all the measurements right and being precise is so important. These boxes take a lot of focus to make, and attaching the two pieces of board can be daunting, as you must make sure not to overlap the folds and ruin the whole box.

Front view of a tuxedo box
View of a tuxedo box opened next to the book it will house.

A finished tuxedo box on the left, and the two pieces of an unfinished tuxedo box opened to show the full spread of the box on the right.

Corrugated Clamshells

Corrugated clamshell boxes came next, with their in depth measuring and precision crimping and cutting. Like a tuxedo box, these boxes offer better storage from light and dust, and are a more structured enclosure. Where they differ, though, is they are made from corrugated board rather than Bristol board, and this offers more support to items that need a little boost of structural help. These boxes are made from one piece of board that is cut and folded into a clam-like box that opens on one end and is attached at the spine.

A flat corrugated blue board that has been cut and pre-folded, ready to form into a box.
A corrugated clamshell during the construction process. This clamshell still needs it’s ends glued in to create it’s box shape.

General Collections Treatment

My final big learning project was cloth tape removal, which was something completely different, making it very enjoyable to learn. Cloth tape removal is taking off old adhesive tape that has been applied to materials that is now falling apart. To remove cloth tape, a poultice of methyl cellulose is applied in thirds to the tape. Introducing moisture to the adhesive allows you to slowly and carefully use a Casselli microspatula to loosen and remove the tape, leaving behind only the original materials.

General collections treatment removing a cloth spine hinge with a methyl cellulose poultice.

An old pamphlet that’s been bound together with cloth tape in the middle of the removal process. Weights hold down pieces of Mylar to keep the pamphlet cover from absorbing any of the poultice. The cloth tape is the grey strip on the right of the pamphlet, and you can see where some of the tape has been removed and what still needs to be done.

Final Impressions

I’ve learned so much over my first month at the lab, but so far corrugated clamshells have been my favorite. It’s been so fun to grow my hand skills and to see how much of a difference one month can make, and I’m so excited to expand my horizons and learn more about the lab in the upcoming months!

Nicole Browning, Conservation Assistant [CHPL]