October | 2018 |

The lab received this book from the UC Classics Library in very poor condition. Ashleigh identified that the red cloth cover was not original to the textblock and overtime it had fallen off, exposing prior binding repairs. Paper fragments along the spine indicated to her that the binding was once originally cased in a paper wrapper before being rebound in a variety of ways. The book, originally sewn with only two sewing stations, had also been side stapled (!!).The staples were extremely corroded, staining the textblock and causing tears along the spine of the textblock pages, however; the original folded gatherings were mostly intact with original sewing stations revealed.

Since this book was important to the library and the librarians wanted the book to be handled by patrons and available to all, we needed to come up with a solution for a new cover that would be supportive of the textblock, flexible and could withstand handling from patrons. We also wanted to conserve the binding in a sympathetic structure to how the text was originally cased and sewn.
While talking with the Lab Conservator, Ashleigh, we explored various ideas for the new conservation cover, and ended up combining what we both had in mind. Clearly, our ideas had been influenced by our professional development opportunities that we attended in May; the AIC meeting Ashleigh attended and the weeklong workshop I attended on historical book structures with Karen Hanmer.
Inspired by the Smithsonian Archives AIC poster, Ashleigh suggested a combination of a sewn boards binding from Gary Frost and a limp vellum binding, adapting the structure of a non-adhesive paper case I learned with Karen Hanmer. Together we decided to explore a combination of all binding structures. Using the sewn boards binding for inspiration, we sewed on library boards as an extra set of endsheets, in addition to paper endsheets. Conservation endbands were sewn on with a back bead, similar to a vellum binding, and were laced through the endsheets and cover, providing extra support and flexibility to the two sewing stations.
To test our idea, I created a small model (as we always do for new ideas). By creating a model I could explore our ideas without causing any harm to the original object.

Model: Sewn boards binding, limp vellum binding and non-adhesive paper case combination, with conservation endbands.

Textblock sewn through the original holes

The model structure was a success! Therefore we proceeded to conserve the original book, starting with removing the staples. After Ashleigh removed the staples, I guarded several gatherings throughout the textblock with Japanese tissue and the textblock was sewn with a link stitch through the original sewing holes with an 18/3 linen thread.

In preparation for the new cover, a combination of sewn boards binding by Gary Frost, limp vellum binding and non-adhesive paper case by Karen Hanmer, two folios of 10 point board Bristol were sewn onto the textblock, one on each side, and lined on the inside with a sheet of 20 point board adhered with PVA.

Conservation endbands of a laminate of alum tawed leather and parchment were sewn, providing extra support for the cover attachment to the textblock.

Sewn boards onto the textblock with conservation endbands

The new cover was created with Cave Paper and adhered to the textblock by wrapping the paper case around the sewn boards and lacing the endbands through the cover.